Water-resistant DYAS FILM is made of many plies of rotary-cut beech veneers glued together with a phenol-formaldehyde adhesive. The grains of adjoining layers are at right angles to each other. The surface is covered on both sides by a phenolic...
Author - admin
Description: The Pinus Plywood BB O&ES is assembled with special veneers following a strict quality control, resulting in a high quality international standard product. Its face and backer are composed of rigorously selected B quality...
Description: The Plywood Pinus C+/C+ O&ES is assembled with special veneers, following a strict quality control resulting in a high quality international standard product. Its face and backer are composed of quality C Pinus veneers...
Description: The Pinus Plywood T & G is assembled using high quality veneers under a strict quality control resulting in a high quality international standard product. The face is composed of C Quality Pinus veneers. The imperfections...
Description: Pinus Plywood C + / C is assembled with high quality veneers following a strict quality control that results in a high quality international standard product. It is produced with quality C Pinus on both faces. The face is...
Description: The Pinus Plywood CDX is assembled with high quality veneers in accordance with international standards. The face is produced with C Pinus grade veneers, and the back face is produced with D Pinus grade veneers, providing it...
Description: The FILM FACED PLYWOOD RIOPLY is assembled with selected veneers following a strict quality control that results in a high quality product based on international standards. It is coated with imported Tego Film 180-gr./m2. This...
The FILM FACED PLYWOOD RIOPLY is assembled with selected veneers following a strict quality control that results in a high quality product based on international standards. It is coated with imported Tego Film 180-gr./m2. This product is...
Available in hardwood and in pine, this product is calibrated and produced with selected veneers in order to give the stability and strength needed by end users. It can be produced in WBP and MR in different thicknesses and sizes, including...
It is a special board which is intended to be covered. Usually built with thicknesses from 25 mm to 45 mm, this material is composed of a single or double lumber core and is covered with cross grain veneers without open defects.