• Thickness = 3mm-50mm – (composites up to 100mm)
  • Standard panel sizes = 2440 / 3050x1220mm, 3050x1525mm
  • Max size = 3680x1840mm (full pallets/half loads only, subject to availability of core and laminate chosen)
  • Wide range of colours & decors
  • Hard-wearing surface
  • Wide variety of core materials available
  • Also available fire retardant to EN 13501 Class B

These products are produced from a core material that is faced on one or both faces with a hard-wearing HPL (high-pressure laminate).

All forms of plywood or other core can be supplied, e.g. MR MDF faced with a high pressure laminate bonded to both sides or one only with a balancer to the reverse.

These panels can be supplied in standard commercial panel sizes up to the maximum available size of that decor (e.g. 2440x1220mm, 3050x1220mm, 3050x1525mm, etc), or they can be cut and machined to your specific requirements.

What is HPL?
High pressure laminate is manufactured in a fusing process that results in an extra-hard decorative laminate. The multiple layers of kraft papers used for the decorative surface, inner layers and backing layer are all impregnated with phenolic resin and fused together in a multiple step press operation offering a wide range of decorative effects.

These laminates are then bonded to a core board in a separate process with glue under pressure. Heat is often is used to accelerate the curing process.

Colours, Woodgrains, Metallics & Abstracts

In principle we can supply bespoke production using any laminate you require, e.g. Altofina, Abet Laminati, Formica and Polyrey. (It is often possible to offer a closest match to colour systems such as RAL Classic, NCS and Pantone)

Below is our standard range of laminates (actual size of thumbnail images = 150mm high). Clicking on woodgrain images shows image of full sheet.

You can order samples direct from the laminate manufacturer here (opens in new window)

Recommended Colours:
NCS & RAL references are nearest corresponding match, LRV = light reflectance value (1-100)

Information

Winwood Products is a Laminated Plywood & MDF supplier offering the following range of options:

Core options
Birch plywood
Beech plywood
Lightweight poplar plywood
Okoume lightweight marine plywood
Through-coloured MDF
FD30 & FD60 fire doors
Tropical hardwood plywood
Commercial MDF (standard, fire retardant, moisture resistant, exterior, etc)
Chipboard (standard, fire retardant, moisture resistant, etc) – full pallets per item
Laminate types
Standard commercial laminates
Fire retardant laminates
Foodsafe laminates
Plastic coated steel

Related Articles

About author View all posts Author website

admin

Leave a Reply

Your email address will not be published. Required fields are marked *