• Thickness = 9mm-18mm
    (Special order = 6mm-30mm)
  • Panel sizes = 1220x2440mm, 1525x3050mm
    (Special order to max 1525x3660mm)
  • Wide range of colours
  • Hard-wearing, stippled surface
  • UV-resistant (rated 6-7 according to DIN 54004)
  • EN 636-3 (fully exposed exterior applications)

This resilient laminated plywood is constructed from a strong, exterior-bonded birch plywood core with a polypropylene film applied to one or both faces. The covering is bonded to the core using an elastic two-part glue meeting EN 204 D4 for exterior applications.

The hard-wearing laminate coating is available in a range of colours and designs and is UV-resistant for good colour fastness (rated 6-7 according to DIN 54004). Some decors incorporate an additional lacquer coat.

In principle, any combination of the RAL Classic colours below can be applied to the surfaces.

Technical details (general)

  • Construction:
    • Exterior birch plywood faced with a hard-wearing UV-resistant film with an ‘orange peel’ texture to its surface, offering fully exterior performance
  • Standard thickness:
    • 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 27mm, 30mm
      (plus surface coating)
  • Standard sizes:
    • 1200 / 1220 / 1250 x 2400 / 2440 / 2500mm
    • 1200 / 1220 x 3000 / 3050 / 3300 / 3660mm
    • 1500 / 1525 x 2400 / 2440 / 3000 / 3050 / 3660mm
  • Special sizes:
    • In principle, any size can be produced up to the maximum stated above, subject to minimum production quantity being met
  • Surface coating:
    • UV-resistant film (approx 0.2mm) with slight stipple texture often described as similar to ‘orange peel’
    • Lacquered panels have satin sheen, while unlacquered are more matt finish
  • Edge treatment:
    • Typically sealed with exterior acrylic paint to protect against moisture
  • Wear rating:
    • Taber abrasion value = typical 1400R (EN 438-2)
  • Tolerances:
    • Length/width:
      Typical: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
    • Thickness (core plywood):
      Ranges from 4mm @ +0.3mm/-0.4mm to 50mm @ ±1.2mm
    • (Special tolerances by arrangement)
  • Bonding Quality:
    • EN 314-2 Class 3 – Exterior
    • E1 (EN 13986) Low formaldehyde, CARB II, ULEF (Ultra Low Emitting Formaldehyde)
  • Hazard class:
    • EN 636-3 – Exterior & high moisture applications
  • Approximate weights of birch plywood core:
  • 6mm =4.4 kg/m2
  • 9mm =6.3 kg/m2
  • 12mm =8.2 kg/m2
  • 15mm =10.1 kg/m2
  • 18mm =12.0 kg/m2
  • 21mm =13.9 kg/m2
  • 24mm =15.9 kg/m2
  • 27mm =18.0 kg/m2
  • 30mm =20.0 kg/m2

Related Articles

About author View all posts Author website

admin

Leave a Reply

Your email address will not be published. Required fields are marked *