xuzhou mega wood Products is a Laminated Plywood & MDF supplier offering the following range of options: Core optionsBirch plywoodBeech plywoodLightweight poplar plywoodOkoume lightweight marine plywoodThrough-coloured MDFFD30 & FD60...
Author - admin
Thickness = 3mm-50mm – (composites up to 100mm)Standard panel sizes = 2440 / 3050x1220mm, 3050x1525mmMax size = 3680x1840mm (full pallets/half loads only, subject to availability of core and laminate chosen)Wide range of colours &...
Immediate delivery with birch or ilomba faces: 4mm-18mm, 2440/2500x1220mmSpecial order: 3mm-6mm up to maximum 2520x1850mm, 8-60mm up to maximum 2100x4100mm (typically 2 pallets per item)NAUF (no added urea-formaldehyde) / CARB ULEF from...
Immediate delivery: 4mm-30mm 2500x1220mm, plus some 3050x1220mm & 3050x1525mmSpecial order: 3mm-6mm up to maximum 2520x1850mm, 8-60mm up to maximum 2100x4100mm (typically 2 pallets per item)NAUF (no added urea-formaldehyde) / CARB ULEF from...
Around 40% lighter than birch plywoodImmediate delivery: 4mm-30mm 2500x1220mm, plus some 3050x1220mm & 3050x1525mmSpecial order: 3mm-6mm up to maximum 2520x1850mm, 8-60mm up to maximum 2100x4100mm (typically 2 pallets per item)NAUF (no...
Okoume faced plywood is available on a core of okoume alternating with another species (described as ‘okoume combi plywood’), or with just the face in okoume on a core of 100% another species (called ‘okoume twin...
4mm-40mm thick (composites up to 100mm)Light in weight (average 450kg/m3)Stock thickness: 4mm-25mmStock size: 2500x1220mmSpecial sizes up to 3100x1830mmSupplied raw or coated with primer, melamine laminate, lacquer or paintSuitable for extreme...
Book Matching DescriptionVisual EffectAlternating pieces of veneer from a flitch are turned over, so that adjacent leaves are “opened” as two pages in a book.Veneer joints match, creating a symmetrical pattern. Yields maximum continuity of...
Rotary Cut Rotary veneer is produced by centering the log in a lathe and turning it against a broad cutting knife which is set into the log at a slight angle. Rotary cut veneer can be sufficiently wide to provide full sheet (one piece) faces...
VENEER CORE All inner plies of wood veneer. Thickness:5/16″ or less: 3-ply3/8″: 5-ply1/2″ to 5/8″: 7-ply3/4″ and over: 7-ply minimum Benefit: Best screwhold power. COMPOSITE CORE Consists of wood veneer inner plies with MDF or MPX...